Saving Money by Repairing your Power Tools

Power tools are generally subjected to severe usage. This leads to wear and tear of the internal parts. It is advisable to repair your power tools by sorting out issues with various parts rather than buying new units. Buying new tools can be very expensive. So, replacing or correcting the tool parts is a very economical and recommended solution.

If your power tool is malfunctioning then the first thing you need to do is diagnose the root cause of the issue. You can read the technical manuals and instruction booklets that come along with your device. You can also get some online help from the manufacturer's website or related blogs. This will help you in analysing the issue and finding out the actual problem. There is a lot of online help available to fix problems related to power tools. You can use the repair instruments and accessories provided by the manufacturer to sort the issue.

Following are the potential problem areas and their remedial actions:

- Battery vent or the electrical cable could become loose due to excessive usage. You need to first ensure your safety and then tighten these parts.

- The Electrical cable could be completely worn out. You can replace it by buying a new cable.

- The links in your power tools like the chainsaw chain or the wedge might be damaged. You can easily replace these instruments at a low cost.

- Batteries become weak due to excessive usage. Instead of replacing the entire unit, you can go for battery rebuilds. These are better options because they are easy and affordable.

- Sometimes the main cable or the rechargeable battery might need a replacement.

- The motor engine needs to be lubricated periodically. You can rectify this issue by proper oil application.

- If your power tools are within the warranty period then you can get them fixed by your local hardware retailer.

- Carbon brushes are integral parts of your power tools. They permit the transmission of electric current. If the carbon brushes are damaged then the flow of electric current is blocked. This results in non-functioning of your power tools. If you have diagnosed that carbon brushes are faulty then you need to replace the brushes. These are extremely cheap compared to the entire unit.

To replace the carbon brushes follow the below steps:
1. Check the tool's user manual for brush substitution guidelines.
2. Buy the correct brushes for your power tool.
3. Ensure that the connection is disconnected.
4. Remove the battery.
5. Trace the location of the brushes on the motor.
6. Cautiously detach the brush covers.
7. Remove the old brushes and insert the new ones in the same position.
8. Confirm that the brush is making contact with the frame switch.

- Always buy original parts recommended by the manufacturer. It is very important to service your parts at regular intervals. This will ensure that your power tools stay durable for a longer duration without needing any replacements.

Repairing your power tools by fine-tuning or replacing different parts will help you save a lot of money.